Nox T3 Device Instructions
(All patients should test for 2 nights within 5 days.)
How To Use The Nox T3
Please test for 2 nights within 5 days after reviewing our written instructions. Click the blue button below for step-by-step written instructions on the Nox T3. Click the red play button below to watch video instructions from the manufacturer.
Press the Nox T3’s center button once. This will activate the display screen. You will see the instruction: ‘Hold Button to Record’. Press and hold the center button for about 3 seconds or until the circle on the display screen completes its loop. You may release the center button when the counter is visible and the word “REC” (recording) shows at the top of the display screen.
Press the Nox T3’s center button once. This will activate the display screen. The counter will then display the duration of your sleep study in hours, minutes, and seconds. Press and hold the center button for about 3 seconds or until the square on the display screen completes its shape. This indicates the recording has been stopped and the test has been completed.
No. Your Nox T3 device comes prepared with a new AA battery that will provide enough power for your 2-night test.
Place the nasal cannula back into position. Tuck the cannula behind your ears with the tightening bead directly beneath and touching your chin. Apply the provided medical tape.
Place the pulse oximeter back into position and apply the medical tape.
Wrap the belt around your chest one inch below the armpits and over any breast tissue. Ensure the belt is not twisted then snap the plastic piece at the end of the belt to the back of the device.
Wrap the abdomen belt (not the cable) around your stomach and place the sensor just above the belly button. Ensure the belt is not twisted then snap the plastic piece at the end of the belt to the back of the sensor.
No, the nasal cannula is made from a soft plastic and is latex free.
2-night home sleep tests increase your evaluation success and minimize potential retesting occurrences. This also ensures we gather enough data for our affiliate sleep physicians to properly interpret the study.
Ideally, you should complete your test and return the device in 3 days. However, you have 5 days to test and return the device. After 5 days, we will start contacting you to warn you of possible late fees.
